How to Choose the Right Impact Moling Contractors for Your Project

Selecting the right impact moling contractors for your project is essential to ensure you hire a qualified and reliable professional. Impact moling, also referred to as moling or trenchless technology but not to be confused with horizontal directional drilling, allows teams to lay or replace underground utilities without the expense and disruption of traditional trenching methods. This approach is especially beneficial for installing or replacing gas lines, electrical cables, small diameter pumped mains,  and water pipes underground.

Impact moling is highly sought after in various sectors and industries due to its minimal disruption approach. It is widely used in urban areas where avoiding disturbance to existing infrastructure and minimising environmental impact are important. This makes impact moling an ideal choice for governmental projects, telecommunications installations, residential developments, environmental remediation, and much more.

Three Tips on Choosing the Right Moling Contractor For You

1. Assess Your Project Needs

Assessing your project needs is an important step. It is understandable though if you don’t quite know what to look for or do not have a thorough understanding of the ground conditions in the area, potential obstructions, or the impact moling process. Collaborating with a professional moling company that can assess your specific project requirements is recommended.

2. Considering Location and Researching Potential Moling Contractors

Some moling contractors operate in a specific location. Still, some offer moling services throughout the UK, making it essential to consider the location when researching the potential impact on contractors. When you are conducting which contractor is right for you, you could look into the following:

3. Discuss Project Specifics

Once you have selected the right moling company, discussing your project needs is crucial to ensure that they understand your specific requirements and can tailor their services accordingly. During the discussion, be sure to cover your required scope, impact moling cost estimates, preferred timeline, site conditions such as soil type or existing utilities, and any special considerations like environmental regulations or access restrictions. This communication ensures alignment and clarity, paving the way for a successful project execution.

Review Past Projects and References

Most reputable moling contractors will be able to showcase their works, directional drilling projects. Viewing projects that have been carried out will help you choose the right impact moling contractors for your specific project.

Permitting and Regulations

Some projects require obtaining permits and following regulations in the local area. It is best to ensure that your moling contractor ensures that a thorough planning process has been carried out and that they have obtained all necessary permits and comply with regulations. This ensures safety, compliance, and the successful completion of your project. 

Precise Communication

Effective communication is key when working with impact moling contractors. It is essential to ensure that there is clear and open communication throughout the project. This includes discussing project timelines, milestones, and any potential challenges that may arise during the process. To help every project run smoothly, EPS understands the importance of being transparent, honest, and descriptive in our communications.

Reputation

A contractor’s reputation is a critical factor to consider when choosing the right impact moling contractors for your project. Research online reviews, testimonials, and ask for references from previous clients to gauge the contractor’s reputation in the industry. A reputable contractor will have positive feedback and a track record of delivering high-quality work.

Check Qualifications and Credentials

You may want to also double-check qualifications. A reputable contractor will willingly provide this information to demonstrate their expertise and track record. This step ensures you select a qualified professional capable of handling your project with competence and reliability.

What EPS Trenchless Installations Can Do For You

We have extensive experience in conducting industrial, commercial, and domestic moling services throughout the UK for a range of projects, including utility installation, cable laying, and drainage systems. Trenchless methods are highly sought after in many industries in preference over traditional trenching methods, as this technology minimises disruption, reduces costs, and speeds up project completion.

Here’s why we are one of the most trusted impact moling contractors in the UK:

Thorough End-to-End Process

Whatever your project requires, we leave your location as we found it. We ensure minimal disruption before, during, and after your project is carried out, giving our clients peace of mind that our expert team will conduct a thorough process at every stage. We ensure thorough:

SURVEYING

We provide a detailed survey, a site visit, and the use of online technology to check geological information and ground conditions for a successful moling project.

PLANNING

EPS will work in partnership with you from beginning to end, planning and advising you on the best way to complete your project.

DRILLING

The drilling process will be handled by our experienced team, ensuring professionalism and precise execution every step of the way.

COMPLETION

We leave your site clean and clear of all materials and debris, providing an end-to-end service and complete reinstatement and site clearance.

Cost-effective Moling Solutions

Moling is a cost-effective solution that provides years of reliable and continued usage of your utilities after installation or replacement. With EPS Trenchless Installations, you can trust that our trenchless services are competitively priced, ensuring that you receive value for money without compromising on quality.

eps van

Over a Decade of Knowledge

With over a decade of experience, we specialise in impact moling services across various industries, efficiently managing projects of varying scopes with efficiency and professionalism. Our dedicated team of experts consistently delivers superior results and professional service, ensuring satisfaction on every job.

mole

Quality Assurance and Client Value

We focus on delivering top-quality results that meet high standards. Our approach includes meticulous attention to detail to ensure durability, efficiency, and cost-effectiveness in every aspect of our impact moling services. We emphasise transparency, clear communication, and customer satisfaction to maintain trust and reliability throughout the project. 

At EPS Trenchless Installations, we aim to surpass your project expectations through dedicated service and proven expertise.

ground scanner

No-Obligation Quote

During our surveying and planning process, we will uncover any hidden obstacles, assess ground conditions, and provide you with an impact moling cost. We have the knowledge and expertise to thoroughly assess the route, however, we may find unexpected issues that could lead to extra costs. If such an instance occurs, we will discuss this with you at the earliest opportunity. We aim to provide an accurate quote for all of our projects, ensuring that you have peace of mind during the whole process.

underground moling scanner

Up-to-date Knowledge of Technological Advancements

We pride ourselves on being highly present within the industry and we are dedicated to improving, updating, and staying current with the latest technological advancements in impact moling techniques. This commitment allows us to provide our clients with the most efficient, effective, and convenient solutions for their specific project needs.

With a wide portfolio of moling projects that we have carried out, and working with a variety of large names, governmental bodies, and private clients, we have built a reputation for excellence in the impact moling industry.

moling equipment

Industry-leading Impact Moling Equipment

At EPS Trenchless Installations, we pride ourselves on using industry-leading impact moling equipment for all our projects. Our state-of-the-art tools and machinery ensure precision, efficiency, and accuracy in every drilling operation. Our equipment is regularly maintained and upgraded to guarantee optimal performance and reliability on-site.

We invest in the best technology available to deliver superior results for our clients, while also prioritising safety and environmental considerations in all our operations.

Approach to Safety

Safety is very important to us at EPS Trenchless Installations. We have implemented a comprehensive safety approach to ensure the well-being of our team, clients, and the environment. Our team undergoes regular training and certifications to stay current with the latest safety protocols.

Before commencing any project, we conduct thorough risk assessments to identify potential hazards and implement necessary safety measures. Our unwavering commitment to safety not only protects everyone involved but also ensures the smooth and incident-free completion of every project.

moling in a graveyard

Environmentally Considerate

At EPS, we are serious about protecting the environment, safeguarding civilians and workers, and providing an in-depth service that provides minimal disturbance to the surrounding location.

We are very aware of our environmental impact and go out of our way to minimise our impact wherever possible. Traditional trenching methods use heavy machinery which contributes CO2 into the atmosphere, whereas by using moling equipment, we ensure minimal impact during pipe installation and pipe replacements.

This approach not only reduces carbon emissions but also preserves the integrity of the surrounding landscape and infrastructure. Our commitment to environmentally friendly practices underscores every aspect of our operations, ensuring sustainable outcomes for future generations.

eps customer

Customer Dedication and Professionalism

At EPS Trenchless Installations, we prioritise customer dedication and professionalism to ensure every project is executed with the highest standards of service and quality. Our commitment begins with understanding your unique project needs and tailoring our approach to meet your requirements effectively.

Clear and open communication is key to our approach. We keep you informed at every stage of the project, providing regular updates and addressing any concerns promptly.